Products
Australian Monitor AMIS250 Mixer Amplifier
The AMIS250 is the largest amplifier in the AMIS mixer amplifier series and delivers 250 watts in a compact 2 RU chassis. With 3 stage vox priority, Vox triggered relay, on board tones, 15 VDC phantom power and insert point the AMIS250 is feature packed and as with all the AMIS series it is extremely reliable.
Description
The Australian Monitor AMIS250 is a six channel, 250 watt mixer amplifier suitable for rack or desk mounting. The amplifier is a self contained compact unit of solid steel construction. The AMIS250 has six universal input channels with separate level controls. Each channel will accept balanced or unbalanced microphone, line and auxiliary inputs. The unit has industry standard XLR microphone sockets and dual RCA auxiliary sockets for each channel. An insert point is featured on the rear panel for those applications where an additional EQ or feedback exterminator may be required.
Features:
- 100V, 70V and 4, 8 ohm outputs
- Vox muting from channels 1, 2 and 3 (selectable)
- Vox triggered relay output
- Tape Output (350mV @ 10K ohms) and balance output (700mv)
- Bell, Pre Announce, Evac and Alert tones in-built (rear panel activation)
- 15V phantom power on all mic inputs (defeatable per channel by rear switch)
- Insert point for connection of AMIS EQ or other processors
- Overdrive protection and internal limiting
- Signal Present LED
- 240VAC/24VDC operation
Downloads:
Additional Information
| Power Output | 250 Watts RMS |
|---|---|
| Maximum Load | 20 Ohms @ 70 Volts |
| Power Bandwidth | 60Hz – 17kHz (- 3dB) |
| Frequency Response | 60Hz – 23kHz (- 3dB) |
| Total Harmonic Distortion | 0.5% @ 1kHz rated power |
| Signal To Noise Ratio | -74dB with all controls at their centre position |
| Tone Controls | Bass at 100Hz Boost +12dB Cut -12dB; Boost +12dB, Cut -12dB; |
| Inputs | Six mic/aux universal inputs with XLR female mic sockets and dual RCA Phono aux sockets |
| Input Sensitivity | Mics: 1mV @ 200 Ohms; Aux: 150mV @ 47K Ohms |
| Outputs Speaker | 70 Volts, 4 Ohms; Tape: 350mV @ 10K Ohms; Line: Balanced 700mV |
| Phantom Power | 18 Volts DC on all Mic inputs |
| Controls | 6 Input channel gain controls, 1 Bass control, 1 Mid Control, |
| Metering/Indicators | Power ”on“ and ”Protect“ LED |
| Power Input | AC: 230/240V – 50Hz, 110V – 60Hz (special) 3 pin IEC connector; DC: 12 Volts |
| Power Consumption (max) | 400W |
| Protection | Current Limiter protection, plus AC and DC fuses |
| Rack Mounting | Standard |
| Tone Generators | Built-in four tone generator module. |
| Muting | Built-in VOX muting. Channels 1 and 2 will mute channels 3, 4, 5 and 6 |
| Dimensions | (H x W x D) 480 x 88 x 380mm (19” x 3.5” x 13”) |
| Shipping Dimensions | (H x W x D) 530 x 190 x 480mm (20.8” x 7.5” x 18.9”) |
| Weight | Net 15kg (33.1lb) |
Brand
Brand
Australian Monitor
