Products

Australian Monitor DCM500 Power Amplifier

The DCM500 is a high performance 500 watt power amplifier designed to meet the needs of the most demanding sound reinforcement installations and applications. The amplifier is designed to operate from both AC mains power as well as 24 volts DC.

SKU: AI-AUMO-AMP011 Categories: , Tags: , , , ,
Description

The DCM500 is a robust but compact 500 watt booster amplifier. With Dual fans and built in trickle charge circuitry in a 2RU chassis, we’ve made the DCM 500 built tough for testing of constant voltage installations.

Features:

  • 240VAC/24VDC operation
  • Balanced XLR input with parallel output
  • Overload and overdrive protection
  • Fan cooling with auto temperature sensing
  • Built-in emergency trickle charge circuitry
  • Transformer balanced XLR input and output
  • Output level 10 stage LEDs
  • 100V, 70V and 4 ohm outputs
  • 2RU

Downloads:

 

Additional Information
Power Output

500 Watts RMS into 100 & 70 Volt line or 4 Ohms
Maximum Load

20 Ohms @ 100V
Frequency Response

50Hz – 15kHz (+/- 3dB) into 100V
Total Harmonic Distortion

Less than 0.5% @ 1kHz; Distortion at Max Power: 0.7%
Signal To Noise Ratio

-82dB
Input Sensitivity

Max 300mV (set @ 1V)
Input Impedance

10k Ohms
Input Connection

Transformer Balanced input with male and female XLR input/output sockets
Outputs

100 & 70 Volts or 4 Ohm speaker outputs via rear panel barrier strip.
Line out to feed additional power amplifiers available from 1 of the paralleled XLR inputs
Controls

Front Panel Power Switch, Recessed front panel input attenuator
Indicators / Metering

Amplifier Status Display Window including: Power On LED; 10 segment LED output meter; Mains fail LED; High temp trip LED
Power Sources

AC: 240V – 50Hz or 110V – 60Hz 3 pin IEC connector;
DC: 24V with built-in trickle charge circuit: 300ma maximum trickle charge
30 Amp maximum current draw on DC 300ma standby (idle) current draw on DC
Power Consumption

800 Watts (maximum)
Protection

Internal Cooling Fan with temperature sensor
Compressor/Limiter

Current Limiter with auto-protect and auto-reset
Dimensions

Chassis (H x W x D) 88 x 483 x 410mm
Weight

18kg
Brand

Brand

Australian Monitor

Australian Monitor is a reputable audio equipment manufacturer based in Australia. The company specializes in designing and producing a wide range of professional audio products, including amplifiers, mixers, speakers, and related accessories.

Related products