Products
Australian Monitor ZRM4 Zone Routing Mixer
The Australian Monitor ZRM4 is a simple to use, yet highly featured 1RU zone routing mixer. Featuring 6 inputs that can be balanced XLR mic or dual RCA/balanced XLR line level, all available to any combination of 4 zone outputs, the ZRM4 makes signal routing in multizone applications easy.
Description
Featuring 6 inputs that can be balanced XLR mic or dual RCA/balanced XLR line level, all available to any combination of 4 zone outputs.
Input one can be designated as a paging input with priority over all other inputs individualy selectable at each zone output. Front panel switches with LED indication provide for simple routing of each input. Each input has bi colour status LED indication & 2 stage equalization. Each input has an internal gain trim which can provide a further +/- 15dB of gain to allow the perfect set up of input gain no matter what the input signal may be. Phantom power & high pass filters are also supplied per input.
Each balanced XLR zone output also features a dual colour status LED & switchable paging mic priority. Remote VCA’s are also available for each output allowing for a wall mounted volume control to be installed in remote zones giving a volume range from off to whatever the master level on the AMIS ZRM4 relevant zone output is set to.
Alert, Evacuation, Bell & Pre announce tones are also provided on board.
The AMIS ZRM4 is a compact yet extremely versatile zone routing mixer which makes the complex task of multizone signal routing simple & cost effective.
Features:
- 6 balanced dual mic/line input
- 4 mono outputs/zones
- 6 dual mic/line inputs with sensitivity control
- In built bell, alert, evac and pre announce chimes
- Individual remote master VCA control for all four outputs/zones
- Inbuilt priority/ducking circuit switchable per output
- Clear indication of zone selection from front panel LEDs
Downloads:
Additional Information
| Power Input | 20VAC; 600mA max or 24 to 34v DC regulated 600mA max |
|---|---|
| Sensitivity | (input required for 0dBu out) |
| RCA In | -26dBu to +4dBu (39mV to 1.23 V) |
| XLR Line In | -26dBu to +4dBu (39mV to 1.23 V) |
| XLR Mic In | -60dBu to -30dBu (0.78mV to 25mV) |
| Max Level In | >14.1 Vrms (+25dBu) |
| Max Level Out | >15.4 Vrms (+26dBu) |
| Frequency Response | 22kHz (0dB/-3dB) |
| Total Harmonic Distortion | Less than 0.1% |
| S /N Ratio | <90dBu 20Hz-20kHz (all pots centred) |
| Crosstalk | <-65dB @ 1kHz |
| Phantom Power | 15VDC |
| Weight | Net 2.9kg (6.4lb) |
| Dimensions | Chassis (H x W x D) 44 x 482 x 188mm |
Brand
Brand
Australian Monitor
