Products
Australian Monitor AMIS1202P Power Amplifier
₱34,880.00
The AMIS1202P is a dual channel 120W + 120W power amplifier designed to deliver continuous full-range performance in a compact and reliable package. The AMIS1202P is two independent amplifiers in one chassis making it the perfect choice for multi-zone or multi-channel applications. The amplifier may operate from mains power or 24V DC.
Description
Tough and reliable describes the AMIS power amplifiers. The AMIS1202P is a dual channel amp that is fan cooled, can run via mains or 24VDC power supply, has rear panel volume and signal present LED and a variety of low impedance and constant voltage outputs.
Features:
- Balanced XLR line level input with parallel output
- Signal Present LED
- Rear panel level control
- Temperature Sensing Fan Cooling
- Current limiting protection
- 100V, 70V, 4 and 8 ohm outputs
- 2RU
- 240VAC/24VDC operation
Downloads:
Additional Information
| Power Output | 120 Watts per channel |
|---|---|
| Maximum Load | 80 Ohms @ 100 Volts |
| Input Impedance | 10K Ohms |
| Frequency Response | 50Hz – 15kHz (+/- 3dB) |
| Total Harmonic Distortion | 0.5% @ 1kHz (1 Watt – full power) |
| Signal To Noise Ratio | -80dB at 100V; -80dB at 8 Ohms; -80dB at 4 Ohms |
| Input Sensitivity | 0.5 Volt RMS – 100 Volt Line |
| Outputs | 100/70 Volt Line and 4/8 Ohm via rear panel barrier strip. |
| Controls | Front panel power switch; Recessed rear panel input attenuator (per channel) |
| Indicators | Signal-present LED per channel |
| Power Input | AC: 230/240V – 50Hz; DC 24V; 110V – 60Hz (special) 3 pin IEC connector |
| Power Consumption | 400 Watts (maximum) |
| Protection | Fuses for overload and short circuit protection, high temperature trip (disconnects load at 120C), DC Output Sensing (disconnects load if DC is present) |
| Rack Mounting | Standard |
| Dimensions | (H x W x D) 88 x 483 x 315mm |
| Weight | Net 15kg |
