Products
Australian Monitor AMIS120P Power Amplifier
The AMIS120P is a 120 watt power amplifier with outputs for 4 and 8 ohms, 70 and 100 volt line. It may be desk or rack mounted. The AMIS120P features a flat screwdriver accessible gain control on the rear panel. This amplifier features a status LED. The amplifier may operate from mains power or 24V DC.
Description
Tough and reliable describes the AMIS power amplifiers. The AMIS120P is fan cooled can run via mains or 24VDC power supply, has rear panel volume and signal present LED and a variety of low impedance and constant voltage outputs.
Features:
- Balanced XLR line level input with parallel output
- Signal Present LED
- Rear panel level control
- Temperature Sensing Fan Cooling
- Current limiting protection
- 100V, 70V, 4 and 8 ohm outputs
- 2RU
- 240VAC/24VDC operation
Downloads:
Additional Information
| Power Output | 120 Watts RMS |
|---|---|
| Maximum Load | 80 Ohms @ 100 Volts |
| Power Bandwidth | 60Hz – 15kHz <0.5% THD |
| Frequency Response | 60Hz – 15kHz (+/- 3dB) |
| Total Harmonic Distortion | 0.5% @ 1kHz rated power |
| Signal To Noise Ratio | -80dB |
| Input Sensitivity | 700mV |
| Outputs | 100V, 70V, 4 Ohm, 8 Ohm |
| Controls | One gain control on rear of the unit via flathead screwdriver control |
| Indicators | Power "on" LED |
| Power Input | AC: 230/240V – 50Hz; DC 24V; 110V – 60Hz (special) 3 pin IEC connector |
| Power Consumption | 300 Watts |
| Protection | Current Limiter protection, plus AC and DC fuses |
| Rack Mounting | Standard |
| Dimensions | (H x W x D) 88 x 480 x 280mm |
| Weight | Net 12kg |
Brand
Brand
Australian Monitor
